Knowing how much energy your hot tub uses can help you relax and unwind without worrying about any potential wasted energy. Below, we’ll go over how hot tubs use power and what makes them
energy-efficient. Here’s what you should know!
How Much Energy Does a Hot Tub Need?
Electricity is what brings a hot tub’s warm water and massage action to life. This power runs through the main electrical components: the heater, the pump, and the jets. Out of the three, the heater draws the most amount of energy. This means that looking at what heater your hot tub has will give you an idea of its electric consumption. If your spa has a 120-volt heater, it likely uses about 1,500 watts. A 240-volt heater, on the other hand, draws around 6,000 watts.
As mentioned, the numbers above are just estimates. The total energy consumption of your hot tub is influenced by several factors, including but not limited to, the temperature settings, the frequency of use, the insulation features, the size of the hot tub, and the climate conditions in your area. If you’re curious about your hot tub’s specific monthly electricity use, consulting your
local hot tub dealer is also a good idea.
What to Look for in an Energy-Efficient Hot Tub
A luxurious hot tub experience doesn’t have to mean high energy bills. Today’s hot tubs are made with sustainability in mind, allowing you to indulge in a calming soak while using minimal electricity. Hot tubs that are energy-efficient typically have these qualities:
1. They have superior insulation
Good insulation is a crucial factor for an energy-efficient hot tub. It enables the hot tub to retain heat so that it needs less energy to keep the water nice and warm. You don’t need to heat up your hot tub as often because superior insulation helps prevent heat from escaping. Hydropool hot tubs are a good example of this since they have an advanced heat exchange system that recycles excess heat from the pumps and reflects it back into the water.
2. They have a high-water flow
Another feature to look for in an energy-efficient hot tub is increased water flow. Hot tubs with high-performance pumps and efficient filtration systems can circulate the water more quickly and effectively, reducing the amount of time needed to heat up the water. This not only saves energy but also makes for a more enjoyable soaking experience since the water is constantly moving and staying fresh.
3. They’re self-cleaning
A hot tub that comes with a self-cleaning function automatically filters and sanitizes the water, making it easier for you to maintain. This means you don’t need to drain and refill the hot tub as frequently, saving water and energy.
4. They have smart controls
Programmable controls can help you optimize your hot tub’s energy usage by allowing you to set schedules and adjust temperature settings. With smart controls, you can also monitor your energy consumption and track your savings over time.
5. They come with a high-quality cover
A cover that is well-designed and properly installed can help prevent heat loss when the tub is not in use. Look for a cover that is made of durable, weather-resistant materials and has a good locking system to keep it in place. When combined with proper maintenance, using a cover can help save energy and prolong the life of your hot tub.
Saving Energy While Enjoying Your Hot Tub
You can lower your hot tub’s energy usage and save money without compromising your enjoyment. Here are easy-to-follow tips that can help you reduce your hot tub’s energy use:
- Use a hot tub cover that is well-designed, properly installed, and made of durable, weather-resistant materials.
- Try to keep the temperature consistent. Constantly adjusting the temperature can cause your hot tub to consume more energy as it works to heat up the water each time.
- Follow a regular cleaning schedule. This helps ensure that the hot tub is running efficiently and doesn’t have to work harder than necessary to keep the water clean and safe for use.
- Check if all the components are in top shape. This can help you identify and address any issues that can lead to energy waste.
If you’re in the market for a new hot tub, consider the long-term benefits of energy efficiency. By choosing a model with the latest energy-saving features and taking steps to minimize your energy use, you can create a sustainable backyard oasis that you’ll enjoy for years to come. Download our free buyer’s guide now to learn more about choosing a hot tub that fits your budget and lifestyle!
