Is Foamy Water a Cause for Concern?
Usually, a little bit of foam is nothing to worry about. When you turn on the jets, it’s normal to see some bubbles and a frothy layer on the water’s surface. After a while, the bubbly froth goes away on its own. There are times, though, when the foam becomes too much and it stays even when you turn off the jets. Excessive foam can actually be a sign of problems in the water quality, like imbalanced chemistry, the presence of contaminants, or even poor filtration. It’s also a good idea to contact your local hot tub dealer for more information about common hot tub water issues.Top Reasons for Foamy Hot Tub Water
Whenever you see foam start to form, it’s best to keep an eye on it. If it lingers or keeps reappearing, you might need to do something about the condition of the water. The first step in doing that is to figure out why the foam is there, so you can take steps to fix it. Here are the most common causes to watch out for:1. The chemistry isn’t right
Foaming can happen when the water chemistry in your hot tub is imbalanced. If the pH, alkalinity, or sanitizer levels are off, they can cause lotions, body oils, and other particles to react differently with the water. This reaction can lead to the formation of bubbles, which then rise to the surface of the water and create foam.2. There’s too much product residue
Oils, lotions, detergents, or other substances brought in by the people who use the hot tub can linger in the water. These substances can contribute to excessive foam.3. The filter isn’t working as it should
When the filters in your hot tub get dirty or clogged, they can’t do their job properly. This means the water doesn’t circulate well, and impurities can build up over time. This build-up can lead to foam forming in the water.How Can You Treat and Prevent Foamy Hot Tub Water?
Once you know why your hot tub water is foamy, you can take steps to treat and prevent it. Here are some simple methods to help you get rid of foam and keep your hot tub water clean:1. Bring back the balance
Maintaining the right balance of chemicals in your hot tub water is important to prevent foamy water. Make it a habit to regularly test the pH, alkalinity, and sanitizer levels in your hot tub using test strips or kits. If any of these levels are not within the recommended range, use the right chemicals to bring them back to the right balance.2. Get squeaky clean before soaking
Before you and your guests start taking a dip in the hot tub, it’s important to shower and rinse off thoroughly. Take a moment to wash away any lotions, oils, detergents, or anything else from your body.3. Give the water a little shock
Every now and then, it’s important to give the hot tub water a shock treatment to get rid of organic substances that cause foam. By regularly shocking the water, you create an environment that is less favourable for foam formation.4. Stay on top of filter care
Take out the hot tub filters and wash them with water to keep them clean. If water isn’t enough to remove the dirt, you can also use a filter cleaner. Also, remember to change your hot tub filters after using them for 12 to 18 months. This ensures they continue to work effectively and keep the water clean.5. Use a foam reducer for a quick fix
This one’s a temporary solution, but you can use anti-foaming products if you need a quick fix. It can help you enjoy your hot tub in the meantime without foam getting in the way.
So, the next time you see foam in your hot tub, don’t worry. By taking proactive steps in keeping the water in the best quality, you can go back to enjoying a clean and inviting soak session in no time. You can also download our free buyer’s guide to learn more about choosing the perfect hot tub for you and your loved ones!